215104
64
Revision A
1014553
A
B
Figure 3.72: Access Panel
5.
From inside the hood, on the right panel in the cab-forward
position, locate removable access panel (B).
6.
Remove four bolts (A) that secure access panel (B).
7.
Remove access panel (B).
8.
Close the hood.
1014554
A
B
C
D
Figure 3.73: Air Intake Stack
NOTE:
In the illustration at right, the side panel has been made
transparent to show items under the hood.
9.
Check that rubber seal (A) on air intake stack is compressed
against plate (B) on the pre-cleaner support.
10. If adjustment is required, open the hood and loosen
nuts (C) on the air intake stack.
11. Close the hood.
12. Access the air intake stack through access hole (D). Adjust
air intake stack.
1014553
A
B
Figure 3.74: Access Panel
13. Open the hood and install access panel (B).
14. From inside the hood, install four bolts (A) that secure
access panel (B) to the side panel.
15. Close the hood.
