215104
185
Revision A
1008925
A
Figure 6.6: Ground Speed Lever
CAUTION
Check to be sure all bystanders have cleared the area.
IMPORTANT:
Before starting engine for the first time the windrower is
operated in a season, remove the protective cover from the
exhaust stack.
3.
Start the engine and activate HEADER DOWN button (A) on
the ground speed lever (GSL) to fully retract header lift
cylinders.
1008942
A
Figure 6.7: Ground Speed Lever
4.
Press REEL UP switch (A) on the GSL to raise the center-link
until the hook is above the attachment pin on the header.
IMPORTANT:
If the center-link is too low, it may contact the header as
the windrower approaches the header for hookup.
1000767
A
B
Figure 6.8: Header Leg and Boot
5.
Drive the windrower slowly forward until boots (A) enter
header legs (B). Continue driving slowly forward until the
lift linkages contact the support plates in the header legs
and the header nudges forward.
6.
Ensure the lift linkages are properly engaged in the header
legs and are contacting the support plates.