215104
163
Revision A
1011798
CXXX
EXXX
TO ACTIVATE PURGE
PRESS AND HOLD
B
A
Figure 4.154: Hydraulic Purge
7.
Press SELECT (B) until ACTIVATE HYD PURGE? is displayed
on the upper line.
•
NO/YES is displayed on the lower line.
8.
Press right arrow (A) to select YES. Press SELECT (B).
•
TO ACTIVATE PURGE is displayed on the upper line.
•
PRESS AND HOLD is displayed on the lower line.
NOTE:
Holding the right arrow (A) activates a timed purge cycle.
The CDM will jump to the exit menu if the arrow is released
before the end of the timed cycle.
CAUTION
Check to be sure all bystanders have cleared the area.
1011799
CXXX
EXXX
PURGE CYCLE STARTED
PRESS AND HOLD
A
Figure 4.155: Hydraulic Purge Cycle
9.
Press and hold right arrow (A) to activate purge cycle.
•
PURGE CYCLE STARTED will display on the upper line.
10. When PURGE CYCLE ENDED is displayed release right
arrow (A).
•
NO EXIT YES is displayed on the lower line.
11. Press right arrow to select YES. Press SELECT.
12. Press PROGRAM to exit programming mode or press
SELECT to proceed to next ACTIVATE FUNCTION.
