215104
137
Revision A
1023731
A
Figure 4.89: Header Tilt Controls on GSL
CAUTION
Check to be sure all bystanders have cleared the area.
6.
Press and hold the HEADER TILT EXTEND button (A) on the
ground speed lever (GSL).
•
CALIBRATING TILT is displayed on the upper line.
•
EXTEND TILT HOLD is displayed on the lower line.
NOTE:
The word HOLD will flash during calibration. HEADER TILT
DONE will display on the lower line once calibration is
complete.
7.
Release the HEADER TILT EXTEND button (A).
•
HEADER TILT SENSOR CAL is displayed on upper line.
•
PRESS RETRACT TILT is displayed on the lower line.
1023732
A
Figure 4.90: Header Tilt Controls on GSL
8.
Press and hold HEADER TILT RETRACT button (A) on GSL.
•
CALIBRATING TILT is displayed on the upper line.
•
RETRACT TILT HOLD is displayed on the lower line.
NOTE:
The word HOLD will flash during calibration. HEADER TILT
COMPLETE will display on the lower line once calibration is
complete.
9.
Release HEADER TILT RETRACT button (A).
•
TO CALIBRATE SELECT is displayed on the upper line.
•
HEADER TILT is displayed on the lower line.
10. Press right arrow to select next header sensor calibration or STOP & EXIT. Press SELECT.
11. Press PROGRAM to exit programming mode.
