215104
144
Revision A
1011785
CXXX
EXXX
DIAGNOSTIC MODE?
NO/YES
A
B
Figure 4.106: Diagnostic Functions
5.
Press SELECT (B) until ENTER SENSOR SETUP? is displayed
on the upper line.
•
NO/YES is displayed on the lower line.
6.
Press right arrow (A) to select YES. Press SELECT (B).
•
KNIFE SPEED SENSOR is displayed on the lower line.
•
ENABLE/DISABLE is displayed on the lower line.
1011815
CXXX
EXXX
KNIFE SPEED SENSOR
ENABLE/DISABLE
C
C
B
A
D
Figure 4.107: Header Sensors
7.
Press left arrow (B) to enable a sensor. Press right arrow (C)
to disable sensor. Press SELECT (D) to confirm selection and
move on to next sensor.
The following sensors are available:
•
HEADER HT SENSOR
•
HEADER TILT SENSOR
•
KNIFE SPEED SENSOR
•
REEL SPEED SENSOR
•
HEADER FLOAT SENSOR
•
OVERLOAD PRESSURE
9
•
HYD OIL TEMP SENSOR
When sensors have been modified, press SELECT (D) to
display the EXIT SENSOR SETUP? selection.
8.
Press right arrow (C) to select YES. Press SELECT.
9.
Press PROGRAM (A) to exit programming mode or press
SELECT to proceed to next diagnostic mode.
9.
Requires installation of optional pressure sensor (MD #B5574).
