215104
190
Revision A
6.2.2
Attaching a D Series or D1 Series Draper Header
–
Hydraulic Center-Link
without Self-Alignment
NOTE:
Draper header boots must be installed onto the windrower lift linkage before starting this procedure.
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Shut down the engine, and remove the key from the ignition.
1000754
A
B
Figure 6.19: Header Leg
2.
Remove hairpin (A) from pins (B), and remove pins from
both header legs.
1008925
A
Figure 6.20: Ground Speed Lever
CAUTION
Check to be sure all bystanders have cleared the area.
IMPORTANT:
Before starting engine for the first time the windrower is
operated in a season, remove the protective cover from the
exhaust stack.
3.
Start the engine and activate HEADER DOWN button (A) on
the ground speed lever (GSL) to fully retract header lift
cylinders.
