215104
84
Revision A
3.19.9
Checking Engine Coolant
1007086
A
B
Figure 3.115: Pressurized Coolant Tank
1.
Visually inspect the coolant level in the pressurized coolant
tank (A).
NOTE:
Allow the engine to cool before checking the coolant level.
The pressurized coolant tank has MAX COLD and MIN COLD
coolant level indicators (B), and coolant levels should be
between these lines.
2.
If necessary, add coolant. Refer to Table
for
specifications.
3.
Ensure coolant concentration in the radiator is rated for
-34°C (-30°F).
3.19.10
Checking Air Conditioning Compressor Belt
1007698
A
Figure 3.116: A/C Compressor Belt
1.
Ensure A/C compressor belt (A) is tensioned so that a force
of 35
–
55 N (8
–
12 lbf) on the belt deflects the belt 5 mm
(3/16 in.) at its midspan.
3.19.11
Replacing the Diesel Exhaust Fluid
Drain the diesel exhaust fluid (DEF) tank and refill with fresh DEF when the windrower is received.
1.
Move the platform on the right cab-forward side of machine to the open position.
2.
Place a drain pan under the DEF tank. Use a sufficiently large drain pan; tank capacity is 29 L (7.5 US gal).
IMPORTANT:
Any spilled DEF must be contained and absorbed by non-combustible absorbent material like sand, and then shoveled
to a suitable container for disposal. DEF is corrosive. If spilled on tank or any surface of the vehicle, rinse thoroughly
with water.
WARNING
Diesel Exhaust Fluid (DEF) contains urea. Do NOT get the substance in your eyes. In case of contact, immediately flush
eyes with water for a minimum of 15 minutes. Do NOT swallow. In the event the DEF is ingested, contact doctor
immediately.
