Lexmark M124x Service Manual Download Page 256

Page: 256 / 318

Part number and kit

Contents

41X1226—Maintenance Kit (220 V)

•

41X1179—Fuser (220 V)

•

41X1197—MPF pick roller and separator pad

•

41X1198—Pick tires

•

41X1212—Separator roller assembly

•

40X8393—Transfer roller

When performing the 200K scheduled maintenance procedure, the following areas should be cleaned of media
dust and toner contamination:

•

Media trays

•

Imaging unit area

•

Transfer roller area

•

Duplex area

•

Standard bin

Resetting the maintenance counter

Always reset the maintenance counter after installing the maintenance kit.

POR into the Conﬁguration menu, and navigate to

Reset Maintenance Counter

Depending on the printer model, press

or touch

to reset the counter, or press

to exit without

resetting the counter.

Once initiated, the operation cannot be canceled.

Cleaning the printer

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock when cleaning the exterior of the

printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before
proceeding.

Notes:

•

Perform this task after every few months.

•

Damage to the printer caused by improper handling is not covered by the printer warranty.

Turn off the printer, and then unplug the power cord from the electrical outlet.

Remove paper from the standard bin and multipurpose feeder.

Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

Wipe the outside of the printer with a damp, soft, lint

‑

free cloth.

Notes:

•

Do not use household cleaners or detergents, as they may damage the ﬁnish of the printer.

4600-830, -835, -895

Maintenance

256

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands