Lexmark M124x, Service Manual

Page: 87 / 318

Error code Description Action
202.33 Paper fed from tray 3 never reached the sensor
(fuser exit). See “Sensor (fuser exit) jam at leading edge
service check” on page 87 .
202.35 Paper fed from tray 3 never cleared the sensor
(fuser exit). See “Sensor (fuser exit) jam at trailing edge
service check” on page 88 .
202.43 Paper fed from tray 4 never reached the sensor
(fuser exit). See “Sensor (fuser exit) jam at leading edge
service check” on page 87 .
202.45 Paper fed from tray 4 never cleared the sensor
(fuser exit). See “Sensor (fuser exit) jam at trailing edge
service check” on page 88 .
202.91 Paper remains detected at the sensor (fuser exit)
after the printer is turned on. See “Sensor (fuser exit) static jam service check”
on page 89 .
202.93 The sensor (fuser exit) detected a jam during or
after a flush action.
Sensor (fuser exit) jam at leading edge service check
Action Yes No
Step 1
Make sure that the paper is loaded properly. Use the
recommended paper. See
“Avoiding jams” on page 66 .
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
a
Enter the Diagnostics menu, and then navigate to:
Input tray quick print
b
Do feed tests from different trays. Check if the same error
occurs.
Does the same problem remain?
Go to step 3. Go to step 7.
Step 3
Check if the fuser cam is functional and free of damage.
Is the fuser cam functional and free of damage?
Go to step 5. Go to step 4.
Step 4
Replace the fuser cam. See “Fuser actuator removal” on
page 182 .
Does the problem remain?
Go to step 5. The problem is
solved.
Step 5
a
Reseat the fuser cables from the controller board.
b
Reseat the fuser cable from the LVPS.
c
Reseat the fuser cable from the extension cable.
Does the problem remain?
Go to step 6. The problem is
solved.
4600-830, -835, -895
Diagnostics and troubleshooting
87