Lexmark M124x Service Manual Download Page 124

Page: 124 / 318

166

‑

168 error messages

Error code Description

Action

166.80

The motor (tray 2 transport) does not turn on.

See

“Optional tray pass

‑

through drive failure

service check” on page 126

166.81

The motor (tray 2 transport) does not turn off.

166.82

The motor (tray 2 transport) speed did not ramp
up to the required level.

166.83

The motor (tray 2 transport) stalled.

166.84

The motor (tray 2 transport) ran too slow.

166.85

The motor (tray 2 transport) ran too fast.

166.86

The motor (tray 2 transport) did not run at the
correct timing.

167.80

The motor (tray 3 transport) does not turn on.

167.81

The motor (tray 3 transport) does not turn off.

167.82

The motor (tray 3 transport) speed did not ramp
up to the required level.

167.83

The motor (tray 3 transport) stalled.

167.84

The motor (tray 3 transport) ran too slow.

167.85

The motor (tray 3 transport) ran too fast.

167.86

The motor (tray 3 transport) did not run at the
correct timing.

168.80

The motor (tray 4 transport) does not turn on.

168.81

The motor (tray 4 transport) does not turn off.

168.82

The motor (tray 4 transport) speed did not ramp
up to the required level.

168.83

The motor (tray 4 transport) stalled.

168.84

The motor (tray 4 transport) ran too slow.

168.85

The motor (tray 4 transport) ran too fast.

168.86

The motor (tray 4 transport) did not run at the
correct timing.

4600-830, -835, -895

Diagnostics and troubleshooting

124

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands