Lexmark M124x Service Manual Download Page 130

Page: 130 / 318

Action

Yes

Step 3

Update the ﬁrmware to the latest version.

Does the problem remain?

Go to step 4.

The problem is
solved.

Step 4

Check the printhead and its cables for damage and improper
installation.

Is the printhead free of damage and properly installed?

Contact the next
level of support.

Go to step 5.

Step 5

Reinstall or replace the printhead. See

“Printhead removal” on

page 239

Installation note:

Perform all the mechanical and electronic

adjustments to the printhead after replacing it. See

“Printhead

assembly adjustment” on page 175

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

Procedure before starting the 9yy service checks

Retrieve certain information that helps your next level of support in diagnosing the problem before replacing
the controller board.

Warning—Potential Damage:

Do not replace the controllefr board unless instructed by your next level of

support.

Collect the history information and ﬁrmware logs (Fwdebug and logs.tar.gz) from the SE menu.

Collect the settings from the Menu Settings Page.

Collect information from the user.

Note:

Not all of the items are retrievable from the printer that you are working on.

A. Collecting the history information from the SE menu

Note:

Make sure that your printer is connected to a network or to a print server.

Open a web browser, type

http://printer_IP_address/se

, and then press

Enter

Notes:

•

printer_IP_address

is the TCP/IP address of the printer.

•

is required to access the printer diagnostic information.

Click

History Information

, copy all information, and then save it as a text ﬁle.

E-mail the text ﬁle to your next level of support.

4600-830, -835, -895

Diagnostics and troubleshooting

130

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands