Lexmark M124x Service Manual Download Page 41

Page: 41 / 318

Actions

Yes

Step 7

Make sure that the paper loaded is from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store paper

in its original wrapper until you use it.

Does the problem remain?

Go to step 8.

The problem is
solved.

Step 8

Make sure that the printer supports the paper loaded.

Is the paper supported?

Contact the next
level of support.

Go to step 9.

Step 9

Load a supported paper.

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

Folded or wrinkled paper check

Note:

Before performing this print quality check, go to the control panel home screen and navigate to

Settings

Troubleshooting

Print Quality Test Pages

, and then perform the Initial print quality check.

See

“Initial print quality check” on page 26

Actions

Yes

Step 1

Check if the printer is using a non-Lexmark toner cartridge.

Note:

If the printer is using a third

‑

party cartridge, then do not

replace the imaging unit. Refer the users to their cartridge
supplier.

Make sure that the toner cartridge is compatible with the
imaging unit.

Does the problem remain?

Go to step 2.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands