Lexmark M124x Service Manual Download Page 141

Page: 141 / 318

Event Log

Display Log

For non-touch-screen printer models, press

to navigate through the settings.

Print Log

This setting lists an extended version of the various printer events.

Enter the Diagnostics menu, and then navigate to:

Event Log

Print Log

For non-touch-screen printer models, press

to navigate through the settings.

Press

or touch

Start

Note:

The events that appear in the report vary depending on the operational history of the printer.

Print Log Summary

This setting lists a brief summary of the various printer events.

Enter the Diagnostics menu, and then navigate to:

Event Log

Print Log Summary

For non-touch-screen printer models, press

to navigate through the settings.

Press

or touch

Start

Note:

The events that appear in the report vary depending on the operational history of the printer.

Mark Log

This setting allows you to create a service, maintenance, or custom log entry. Each log entry is added in the
printer event log.

Enter the Diagnostics menu, and then navigate to:

Event Log

Mark Log

For non-touch-screen printer models, press

to navigate through the settings.

Select a log that you want to create, and then press

or touch

Start

Input tray quick print

This setting lets you print a single or continuous Quick Test page in either duplex or simplex mode.

Enter the Diagnostics menu, and then select

Input tray quick print

Select where you want to print the pages from.

Select whether to print a single or continuous test page, and then select

Start

4600-830, -835, -895

Service menus

141

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands