Lexmark M124x Service Manual Download Page 55

Page: 55 / 318

Actions

Yes

Step 6

Check if the imaging unit contacts (C) are contaminated or bent out
of proper position.

Are the contacts contaminated and bent out of proper position?

Go to step 7.

Go to step 8.

Step 7

Clean or repair the imaging unit contacts.

Does the problem remain?

Go to step 8.

The problem is
solved.

Step 8

Check connection JPS1 on the controller board and the
connections on the power supply.

Are the connections properly connected?

Go to step 10.

Go to step 9.

Step 9

Reconnect the cables.

Does the problem remain?

Go to step 10.

The problem is
solved.

Step 10

Replace the power supply. See

“Power supply removal” on

page 216

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

White streaks and voided areas check

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands