Lexmark M124x Service Manual Download Page 88

Page: 88 / 318

Action

Yes

Step 6

Check the fuser for problems. See

“Fuser error service check” on

page 110

Does the problem remain?

Go to step 7.

The problem is
solved.

Step 7

Do the service checks related to the affected source tray.

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

Sensor (fuser exit) jam at trailing edge service check

Action

Yes

Step 1

Make sure that the paper is loaded properly. Use the
recommended paper. See

“Avoiding jams” on page 66

Does the problem remain?

Go to step 2.

The problem is
solved.

Step 2

Remove all obstructions along the rear door paper path.

Check the rear door and its components for damage.

Are the rear door and its components free of damage?

Go to step 4.

Go to step 3.

Step 3

Replace the rear door and cover or rear access door. See

“Rear

door and cover removal” on page 234

Does the problem remain?

Go to step 4.

The problem is
solved.

Step 4

Check the redrive assembly and its components for wear and
damage.

Are the redrive assembly and its components free of wear and
damage?

Contact the next
level of support.

Go to step 5.

Step 5

Replace the redrive assembly. See

“Redrive assembly removal”

on page 236

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands