Lexmark M124x Service Manual Download Page 33

Page: 33 / 318

Actions

Yes

Step 10

Replace the cable.

Does the problem remain?

Go to step 11.

The problem is
solved.

Step 11

Check the transfer roller for proper installation. If necessary,
remove and then reinstall the transfer roller.

Check the transfer roller for contamination and damage.

Is the transfer roller free of contamination and damage?

Go to step 13.

Go to step 12.

Step 12

Replace the transfer roller. See

“Transfer roller removal” on

page 206

Does the problem remain?

Go to step 13.

The problem is
solved.

Step 13

Check the transfer roller left contact spring on the transfer roller
left arm for damage.

Is the contact spring free of damage?

Go to step 15.

Go to step 14.

Step 14

Replace the transfer roller left arm with cable.

Does the problem remain?

Go to step 15.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands