Lexmark M124x Service Manual Download Page 120

Page: 120 / 318

140 errors

140 error messages

Error code Description

Action

140.81

Motor (main) does not turn off.

See

“Main drive failure service check” on

page 120

140.82

Motor (main) speed did not ramp up to the
required level.

140.83

Motor (main) stalled.

140.84

Motor (main) ran too slow.

140.85

Motor (main) ran too fast.

140.86

Motor (main) did not run at the correct timing.

Main drive failure service check

Action

Yes

Step 1

Remove the left cover. See

“Left cover removal” on page

177

Remove the right cover. See

“Right cover removal” on

page 186

Reseat the cable from the main drive gearbox and the controller
board.

Does the problem remain?

Go to step 2.

The problem is
solved.

Step 2

Enter the Diagnostics menu, and then navigate to:

Printer diagnostics and adjustments

Motor tests

Transport

Touch

Start

Does the motor run?

Contact the next
level of support.

Go to step 3.

Step 3

Check the motor and its gears for misalignment, wear, and
damage.

Is the main drive gearbox properly installed and free of wear and
damage?

Contact the next
level of support.

Go to step 4.

Step 4

Reinstall or replace the main drive gearbox. See

“Main drive

gearbox removal” on page 178

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

120

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands