Lexmark M124x Service Manual Download Page 76

Page: 76 / 318

Error code Description

Action

200.13

Paper fed from tray 1 was detected later than
expected or was never detected at the sensor
(input).

See

“Tray 1 to sensor (input) jam at leading edge

service check” on page 80

200.14

Paper fed from tray 1 cleared the sensor (input)
earlier than expected.

See

“Tray 1 to sensor (input) jam at trailing edge

service check” on page 81

200.15

Paper fed from tray 1 never cleared the sensor
(input).

200.22

Paper fed from tray 2 was detected earlier than
expected at the sensor (input).

See

“Optional tray to sensor (input) jam at leading

edge service check” on page 83

200.23

Paper fed from tray 2 was detected later than
expected or was never detected at the sensor
(input).

200.24

Paper fed from tray 2 cleared the sensor (input)
earlier than expected.

See

“Optional tray to sensor (input) jam at trailing

edge service check” on page 84

200.25

Paper fed from tray 2 never cleared the sensor
(input).

200.32

Paper fed from tray 3 was detected earlier than
expected at the sensor (input).

See

“Optional tray to sensor (input) jam at leading

edge service check” on page 83

200.33

Paper fed from tray 3 was detected later than
expected or was never detected at the sensor
(input).

200.34

Paper fed from tray 3 cleared the sensor (input)
earlier than expected.

See

“Optional tray to sensor (input) jam at trailing

edge service check” on page 84

200.35

Paper fed from tray 3 never cleared the sensor
(input).

200.42

Paper fed from tray 4 was detected earlier than
expected at the sensor (input).

See

“Optional tray to sensor (input) jam at leading

edge service check” on page 83

200.43

Paper fed from tray 4 was detected later than
expected or was never detected at the sensor
(input).

200.44

Paper fed from tray 4 cleared the sensor (input)
earlier than expected.

See

“Optional tray to sensor (input) jam at trailing

edge service check” on page 84

200.45

Paper fed from tray 4 never cleared the sensor
(input).

200.91

Paper remains detected at the sensor (input)
after the printer is turned on.

See

“Sensor (input) static jam service check” on

page 86

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands