Lexmark M124x Service Manual Download Page 110

Page: 110 / 318

Fuser error service check

Action

Yes

Step 1

Turn off the printer, and then unplug the power cord.

Remove the rear door and cover. See

“Rear door and cover

removal” on page 234

Reseat the fuser cable from the power supply and the controller
board.

Does the problem remain?

Go to step 2.

The problem is
solved.

Step 2

Disconnect the fuser cable from the power supply, and then
measure its resistance.

Check if the resistance is close to the following values:

•

220V fuser—43 ohms

•

110V fuser—10 ohms

•

100V fuser—8 ohms

Does the fuser have a normal resistance value?

Go to step 3.

Go to step 5.

Step 3

Remove the fuser. See

“Fuser removal” on page 234

Check the fuser gears for wear and damage. Rotate the gears,
and then check if they move properly.

Check the fuser cables and connectors for damage.

Check the fuser belts for wear and damage.

Is the fuser free of wear and damage?

Go to step 4.

Go to step 5.

Step 4

Reinstall the fuser.

Does the problem remain?

Go to step 5.

The problem is
solved.

Step 5

Replace the fuser. See

“Fuser removal” on page 234

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

110

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands