Lexmark M124x Service Manual Download Page 136

Page: 136 / 318

Action

Yes

Step 26

Are there any more ISP options to install?

Go to step 27.

The problem is
solved.

Step 27

Install the next ISP option.

POR the printer.

Does the error remain?

Go to step 29.

Go to step 28.

Step 28

Run a job to test the option.

Does the error remain?

Go to step 29.

Go to step 26.

Step 29

Upgrade the ﬁrmware if it was not upgraded in a previous step.

Note:

Contact your next level of support for the correct

ﬁrmware level to use.

POR the printer.

Send the printer a print job.

Does the error remain?

Go to step 30.

Go to step 26.

Step 30

Replace the faulty ISP option.

POR the printer.

Does the error remain?

Go to step 31.

Go to step 26.

Step 31

Contact your next level of support. You will need the following information:

•

Exact 900.xx error digits and complete error message

•

Printed menu settings page

•

Printed network settings page

•

Device error log

•

A sample print ﬁle if the error appears to be isolated to a single ﬁle

•

File/Application used if the error is related to speciﬁc print ﬁle

•

Device operating system

•

Driver used (PCL/PS)

•

Frequency of the occurrence of the error

4600-830, -835, -895

Diagnostics and troubleshooting

136

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands