Lexmark M124x Service Manual Download Page 123

Page: 123 / 318

162

‑

164 error messages

Error code Description

Action

162.80

The motor (tray 2 pick) does not turn on.

See

“Optional tray pick drive failure service

check” on page 125

162.81

The motor (tray 2 pick) does not turn off.

162.82

The motor (tray 2 pick) speed did not ramp up to
the required level.

162.83

The motor (tray 2 pick) stalled.

162.84

The motor (tray 2 pick) ran too slow.

162.85

The motor (tray 2 pick) ran too fast.

162.86

The motor (tray 2 pick) did not run at the correct
timing.

163.80

The motor (tray 3 pick) does not turn on.

163.81

The motor (tray 3 pick) does not turn off.

163.82

The motor (tray 3 pick) speed did not ramp up to
the required level.

163.83

The motor (tray 3 pick) stalled.

163.84

The motor (tray 3 pick) ran too slow.

163.85

The motor (tray 3 pick) ran too fast.

163.86

The motor (tray 3 pick) did not run at the correct
timing.

164.80

The motor (tray 4 pick) does not turn on.

164.81

The motor (tray 4 pick) does not turn off.

164.82

The motor (tray 4 pick) speed did not ramp up to
the required level.

164.83

The motor (tray 4 pick) stalled.

164.84

The motor (tray 4 pick) ran too slow.

164.85

The motor (tray 4 pick) ran too fast.

164.86

The motor (tray 4 pick) did not run at the correct
timing.

4600-830, -835, -895

Diagnostics and troubleshooting

123

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands