Lexmark M124x Service Manual Download Page 64

Page: 64 / 318

Actions

Yes

Step 1

Check if the printer is using a genuine and supported Lexmark
toner cartridge.

Note:

If the printer is using a third

‑

party cartridge, then refer the

users to their cartridge supplier.

Is the printer using a genuine and supported toner cartridge?

Go to step 3.

Go to step 2.

Step 2

Install a genuine and supported toner cartridge.

Does the problem remain?

Go to step 3.

The problem is
solved.

Step 3

From the control panel, set the paper type, texture, and weight in
the Paper menu to match the paper loaded.

Does the problem remain?

Go to step 4.

The problem is
solved.

Step 4

Remove, and then reinstall the fuser.

Does the problem remain?

Go to step 5.

The problem is
solved.

Step 5

Replace the fuser. See

“Fuser removal” on page 234

Does the problem remain?

Go to step 6.

The problem is
solved.

Step 6

Reseat the connections on the power supply.

Does the problem remain?

Go to step 7.

The problem is
solved.

Step 7

Replace the power supply. See

“Power supply removal” on

page 216

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

Toner specks appear on prints check

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands