Lexmark M124x Service Manual Download Page 142

Page: 142 / 318

Output bin quick feed

This setting allows you to send a single or continuous test page to a bin.

For non-touch-screen printer models, press

to navigate through the settings.

Enter the Diagnostics menu, and then touch

Output bin quick feed

Select where you want to send the test page.

Select whether to send a single or continuous test page, and then touch

Start

Printer Setup

Printed page count (mono)

This setting displays the amount of pages printed in mono.

Enter the Diagnostics menu, and then select

Printer Setup

View the printed page count for mono.

Printed page count (color)

This setting displays the amount of pages printed in color.

Enter the Diagnostics menu, and then select

Printer Setup

View the printed page count for color.

Permanent page count

This setting displays the total number of pages printed in mono and color. After all the print tests are completed,
this value resets to zero.

Enter the Diagnostics menu, and then select

Printer Setup

View the permanent page count.

Enable edge-to-edge (printing)

This setting shifts all four margins to the physical edges of the page.

Enter the Diagnostics menu, and then navigate to:

Printer Setup

Enable edge

‑

edge (printing)

For non-touch-screen printer models, press

to navigate through the settings.

Select a setting to adjust.

Note:

This feature does not work in PPDS emulation.

4600-830, -835, -895

Service menus

142

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands