Lexmark M124x Service Manual Download Page 89

Page: 89 / 318

Sensor (fuser exit) static jam service check

Action

Yes

Step 1

Make sure that the paper is loaded properly. Use the
recommended paper. See

“Avoiding jams” on page 66

Does the problem remain?

Go to step 2.

The problem is
solved.

Step 2

Reseat the fuser cables from the controller board.

Reseat the fuser cable from the LVPS.

Reseat the fuser cable from the extension cable.

Does the problem remain?

Go to step 3.

The problem is
solved.

Step 3

Check if the fuser cam is functional and free of damage.

Is the fuser cam functional and free of damage?

Go to step 5.

Go to step 4.

Step 4

Replace the fuser cam. See

“Fuser actuator removal” on

page 182

Does the problem remain?

Go to step 5.

The problem is
solved.

Step 5

Enter the Diagnostics menu, and then navigate to:

Printer diagnostics and adjustments

Sensor tests

Find the sensor (Fuser exit).

Does the sensor status change while toggling the sensor?

Go to step 7.

Go to step 6.

Step 6

Replace the fuser. See

“Fuser removal” on page 234

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

Step 7

Check the fuser for problems. See

“Fuser error service check” on

page 110

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands