Lexmark M124x Service Manual Download Page 46

Page: 46 / 318

Skewed print check

Note:

Before performing this print quality check, go to the control panel home screen and navigate to

Settings

Troubleshooting

Print Quality Test Pages

, and then perform the Initial print quality check.

See

“Initial print quality check” on page 26

Actions

Yes

Step 1

Check the guides in the tray where the skewed prints are sourced
from.

Note:

If paper is sourced from the MPF, then proceed to

step 9

Does the position of the guides match the paper loaded?

Go to step 3.

Go to step 2.

Step 2

Adjust the guides to match the paper loaded.

Does the problem remain?

Go to step 3.

The problem is
solved.

Step 3

Check if the printer supports the paper loaded.

Note:

For a complete list of supported paper, see the printer

User’s Guide

Is the paper supported?

Go to step 5.

Go to step 4.

Step 4

Remove the paper, and then load a supported one.

Does the problem remain?

Go to step 5.

The problem is
solved.

Step 5

Check the tray pick roller for excess wear and contamination.

Is the pick roller free from excess wear and contamination?

Go to step 7.

Go to step 6.

Step 6

Replace the pick roller. See

“Pick roller assembly removal” on

page 230

Does the problem remain?

Go to step 7.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands