Lexmark M124x Service Manual Download Page 47

Page: 47 / 318

Actions

Yes

Step 7

Perform a print test.

From the Diagnostics menu, select

PRINT TESTS

Tray [x]

Note:

[x] refers to the tray where the skewed prints are sourced

from.

Does the problem remain?

Go to step 8.

The problem is
solved.

Step 8

Adjust the margins.

From the Diagnostic menu, select

REGISTRATION

Does the problem remain?

Go to step 15.

The problem is
solved.

Step 9

Check the guides in the MPF tray.

Does the position of the guides match the paper loaded?

Go to step 11.

Go to step 10.

Step 10

Adjust the guides to match the paper loaded.

Does the problem remain?

Go to step 11.

The problem is
solved.

Step 11

Check if the printer supports the paper loaded.

Note:

For a complete list of supported paper, see the printer

User’s Guide

Is the paper supported?

Go to step 13.

Go to step 12.

Step 12

Remove the paper, and then load a supported one.

Does the problem remain?

Go to step 13.

The problem is
solved.

Step 13

Check the MPF pick roller for excess wear and contamination.

Is the MPF pick roller free from excess wear and contamination?

Go to step 15.

Go to step 14.

Step 14

Replace the MPF pick roller. See

“MPF pick roller and separator

pad removal” on page 209

Does the problem remain?

Go to step 15.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands