Lexmark M124x Service Manual Download Page 103

Page: 103 / 318

Error code Description

Action

41.40

The imaging unit and toner cartridge are
mismatched or incompatible.

See

“Mismatched supplies error service check”

on page 106

42.xx

The toner cartridge is incompatible due to printer
region mismatch.

43.40

A toner cartridge shutter error was detected.

44.40

The toner cartridge and printer are mismatched.

44.60

The imaging unit and printer are mismatched.

80.0x

The remaining life of the fuser is nearly low.

See

“Maintenance kit low service check” on

page 106

80.1x

The remaining life of the fuser is low.

80.2x

The remaining life of the fuser is very low.

80.3x

The fuser life has ended.

80.4x

The fuser life has ended. The printer forces a hard
stop on the fuser.

84.0x

The remaining life of the imaging unit is nearly low.

84.1x

The remaining life of the imaging unit is low.

84.2x

The remaining life of the imaging unit is very low.

84.3x

The imaging unit life has ended.

84.4x

The imaging unit life has ended. The printer forces
a hard stop on the imaging unit.

88.0x

The remaining life of the toner cartridge is nearly
low.

88.1x

The remaining life of the toner cartridge is low.

88.2x

The remaining life of the toner cartridge is very
low.

88.3x

The toner cartridge life has ended.

88.4x

The toner cartridge life has ended. The printer
forces a hard stop on the toner cartridge.

Unsupported or unresponsive toner cartridge service check

Action

Yes

Step 1

Check whether the toner cartridge installed is genuine.

Is the cartridge a genuine and supported Lexmark unit?

Go to step 3.

Go to step 2.

Step 2

Install a genuine and supported Lexmark toner cartridge.

Does the problem remain?

Go to step 3.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

103

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands