Lexmark M124x Service Manual Download Page 146

Page: 146 / 318

For non-touch-screen printer models, press

to navigate through the settings.

Enter the Diagnostics menu, and then navigate to:

Printer diagnostics & adjustments

Registration adjust

Select a setting to adjust.

Add-on cards tests

This setting allows you to test the add-on cards installed on the printer.

For non-touch-screen printer models, press

to navigate through the settings.

Enter the Diagnostics menu, and then navigate to:

Printer diagnostics & adjustments

Add

‑

on cards tests

Select a card.

Margin Offset

This setting allows you to adjust the margin offset and to print or reset the default settings.

For non-touch-screen printer models, press

to navigate through the settings.

Enter the Diagnostics menu, and then navigate to:

Printer diagnostics & adjustments

Margin Offset

Select a setting.

Universal Override

This setting allows the user to feed custom media sizes to a Custom Media Tray.

For non-touch-screen printer models, press

to navigate through the settings.

Enter the Diagnostics menu, and then navigate to:

Printer diagnostics & adjustments

Universal Override

Select a setting to adjust.

Additional input tray diagnostics

Sensor tests

For non-touch-screen printer models, press

to navigate through the settings.

Enter the Diagnostics menu, and then touch

Additional input tray diagnostics

From the Sensor tests section, touch

Start

A dialog listing the sensor tests appears.

4600-830, -835, -895

Service menus

146

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands