Lexmark M124x Service Manual Download Page 48

Page: 48 / 318

Actions

Yes

Step 15

Perform the paper skew adjustment. See

“Printhead assembly

adjustment” on page 175

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

Streaked vertical lines appear on prints check

Note:

Before performing this print quality check, go to the control panel home screen and navigate to

Settings

Troubleshooting

Print Quality Test Pages

, and then perform the Initial print quality check. See

“Initial print quality check” on page 26

Actions

Yes

Step 1

Check if the printer is using a genuine and supported Lexmark
toner cartridge.

Note:

If the printer is using a third

‑

party cartridge, then refer the

users to their cartridge supplier.

Is the printer using a genuine and supported toner cartridge?

Go to step 3.

Go to step 2.

Step 2

Install a genuine and supported toner cartridge.

Does the problem remain?

Go to step 3.

The problem is
solved.

Step 3

Remove, and then reinstall the imaging unit.

Does the problem remain?

Go to step 4.

The problem is
solved.

Step 4

Replace the imaging unit.

Does the problem remain?

Go to step 5.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands