Lexmark M124x Service Manual Download Page 56

Page: 56 / 318

Note:

Before performing this print quality check, go to the control panel home screen and navigate to

Settings

Troubleshooting

Print Quality Test Pages

, and then perform the Initial print quality check.

See

“Initial print quality check” on page 26

Actions

Yes

Step 1

Check if the printer is using a genuine and supported Lexmark
toner cartridge.

Note:

If the printer is using a third

‑

party cartridge, do not replace

the imaging unit. Refer the users to their cartridge supplier.

Is the printer using a genuine and supported toner cartridge?

Go to step 3.

Go to step 2.

Step 2

Install a genuine and supported toner cartridge.

Does the problem remain?

Go to step 3.

The problem is
solved.

Step 3

Set the paper type and weight settings in the Paper menu to match
the paper loaded.

Note:

Make sure that the printer supports the paper loaded. For

a complete list of supported paper, see the printer

User’s Guide

Does the problem remain?

Go to step 4.

The problem is
solved.

Step 4

Update the ﬁrmware to the latest version available.

Enter the Diagnostics menu, and then change the EngSetting
14 value to 48.

Note:

You can also change the setting through a bundle ﬁle

or NPA command.

Set Quite mode to Off.

Review the Event Log Summary sheets and check if either error
code 31.46 or 31.66 events occurred for the imaging unit. If they
did, check if they are occurring with the current toner cartridge.

Does the problem remain?

Go to step 5.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands