Lexmark M124x Service Manual Download Page 44

Page: 44 / 318

Actions

Yes

Step 5

Replace the imaging unit.

Does the problem remain?

Go to step 6.

The problem is
solved.

Step 6

Check if the imaging unit contact (C) is contaminated, broken, or
bent out of proper position.

Is the contact contaminated, broken, or bent out of proper
position?

Go to step 7.

Go to step 8.

Step 7

Clean or repair the imaging unit contacts.

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

Step 8

Check the high voltage metal contacts on the imaging unit for
damage. If necessary, replace the imaging unit.

Does the problem remain?

Go to step 9.

The problem is
solved.

Step 9

Check cable JPS1 from the controller board to the power supply
for proper connection.

Is the cable properly connected?

Go to step 11.

Go to step 10.

Step 10

Reseat the cable.

Does the problem remain?

Go to step 11.

The problem is
solved.

Step 11

Replace the cable.

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands