Lexmark M124x Service Manual Download Page 94

Page: 94 / 318

MPF pick failure service check

Action

Yes

Step 1

Make sure that the paper is loaded properly. Use the
recommended paper. See

“Avoiding jams” on page 66

Does the problem remain?

Go to step 2.

The problem is
solved.

Step 2

Enter the Diagnostics menu, and then navigate to:

Input tray quick print

Tray 1

Single

Check if the same error occurs.

Does the same problem remain?

Go to step 3.

Perform the
appropriate service
check for the speciﬁc
error.

Step 3

Check the jam access cover for obstructions along the paper
path. Check if the cover interferes with the MPF pick roller
movement.

Check if the jam access cover components are functional and
free of damage.

Are the jam access cover and its components functional and free
of obstructions and damage?

Go to step 5.

Go to step 4.

Step 4

Reinstall or replace the jam access cover. See

“Jam access cover

removal” on page 206

Does the problem remain?

Go to step 5.

The problem is
solved.

Step 5

Check the MPF pick roller and separator pad for wear and damage.

Are the MPF roller and separator pad free of wear and damage?

Go to step 7.

Go to step 6.

Step 6

Replace the MPF pick roller and separator pad. See

“MPF pick

roller and separator pad removal” on page 209

Does the problem remain?

Go to step 7.

The problem is
solved.

Step 7

Enter the Diagnostics menu, and then navigate to:

Printer diagnostics and adjustments

Sensor tests

Find the sensor (MPF media present).

Does the sensor status change while toggling the sensor?

Go to step 10.

Go to step 8.

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands