Lexmark M124x Service Manual Download Page 114

Page: 114 / 318

126 errors

126 error messages

Error code Description

Action

126.05

The LVPS power dropped but the printer was not
in sleep mode.

See

“LVPS service check” on page 114

126.06

LVPS 25V line error was detected.

126.07

LVPS 5V rail was down during power

‑

on.

126.10

No line frequency was detected.

126.11

Line frequency has gone outside the operating
range.

126.12

LVPS mismatch was detected.

See

“LVPS mismatch service check” on

page 115

126.13

LVPS mismatch was detected.

LVPS service check

Note:

Make sure that the voltage output of the electrical outlet matches the voltage rating of the printer.

Action

Yes

Step 1

Turn off the printer, and then unplug the power cord.

Remove the rear door and cover. See

“Rear door and cover

removal” on page 234

Remove the right cover. See

“Right cover removal” on

page 186

Reseat all the cables from the controller board.

Reseat all the cables from the power supply.

CAUTION—SHOCK HAZARD:

To avoid the risk of

electrical shock, do not touch the exposed wires and circuits.

Does the problem remain?

Go to step 2.

The problem is
solved.

Step 2

Turn off the printer, and then remove the power cord.

Check if the resistance (between terminals A and D) of the
power supply socket is close to 30 ohms.

Does the socket have a normal resistance value?

Go to step 3.

Go to step 5.

4600-830, -835, -895

Diagnostics and troubleshooting

114

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands