Lexmark M124x Service Manual Download Page 138

Page: 138 / 318

MS622 and M3250

Use the

Display

View printing options, printer status, and error messages.

Home button

Go to the home screen.

Keypad

Enter numbers or symbols in an input ﬁeld.

Power button

Turn on or turn off the printer.

Note:

To turn off the printer, press and hold the power button for ﬁve seconds.

Stop or Cancel button Stop the current printer task.

Indicator light

Check the printer status.

Volume buttons

Adjust the volume of the headset or speaker.

Backspace button

Move the cursor backward and delete a character in an input ﬁeld.

Understanding the status of the power button and indicator light

Indicator light

Printer status

Off

The printer is off or in Hibernate mode.

Blue

The printer is ready or processing data.

Red

The printer requires user intervention.

Power button light

Printer status

Off

The printer is off, ready, or processing data.

Solid amber

The printer is in sleep mode.

Blinking amber

The printer is in hibernate mode.

Using the home screen

When the printer is turned on, the display shows the home screen. Use the home screen buttons and icons to
initiate an action.

Note:

Your home screen may vary depending on your home screen customization settings, administrative

setup, and active embedded solutions.

4600-830, -835, -895

Service menus

138

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands