Lexmark M124x Service Manual Download Page 129

Page: 129 / 318

Error code Description

Action

611.02

An Input ISR error occurred and the printhead was
not ready.

See

“Printhead communication error service

check” on page 129

611.32

Lost Hsync errors were detected. Laser safety
interlock system may be the cause.

611.34

A mirror motor lock error was detected.

Engine error service check

Action

Yes

Step 1

Restart the printer.

Does the problem remain?

Go to step 2.

The problem is
solved.

Step 2

Remove the right cover. See

“Right cover removal” on

page 186

Reseat all the cables on the controller board.

Check the controller board contacts and pins for damage.

Is the controller board free of damage?

Contact the next
level of support.

Go to step 3.

Step 3

Replace the controller board. See

“Controller board removal” on

page 194

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

Printhead communication error service check

Action

Yes

Step 1

Restart the printer.

Does the problem remain?

Go to step 2.

The problem is
solved.

Step 2

Remove the top cover. See

“Top cover removal” on page

238

Remove the right cover. See

“Right cover removal” on

page 186

Reseat the printhead cable from the printhead and the
controller board.

Does the problem remain?

Go to step 3.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

129

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands