Lexmark M124x Service Manual Download Page 66

Page: 66 / 318

Actions

Yes

Step 8

Using an approved toner vaccum cleaner, completely clean the
printer, toner cartridge, and imaging unit of toner contamination.

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

Paper jams

Avoiding jams

Load paper properly

•

Make sure that the paper lies ﬂat in the tray.

Correct loading of paper Incorrect loading of paper

•

Do not load or remove a tray while the printer is printing.

•

Do not load too much paper. Make sure that the stack height is below the maximum paper ﬁll indicator.

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands