Lenovo x3250 m6 Installation And Service Manual Download Page 509

Page: 509 / 696

1. Check IBM support site for an applicable service bulletin or firmware update that applies to

this error.

Update the UEFI image.

Replace the system board.

•

S.3040007 [S.3040007]

Explanation:

A firmware fault has been detected in the UEFI image. Internal UEFI Firmware Fault

Detected, System halted

Severity

Error

User Response

Complete the following steps:

1. Check IBM support site for an applicable service bulletin or firmware update that applies to

this error.

Update the UEFI image.

Replace the system board.

•

S.3050007 [S.3050007]

Explanation:

A firmware fault has been detected in the UEFI image. Internal UEFI Firmware Fault

Detected, System halted

Severity

Error

User Response

Complete the following steps:

1. Check IBM support site for an applicable service bulletin or firmware update that applies to

this error.

Update the UEFI image.

Replace the system board.

•

S.3060007 [S.3060007]

Explanation:

A firmware fault has been detected in the UEFI image. Internal UEFI Firmware Fault

Detected, System halted

Severity

Error

User Response

Complete the following steps:

1. Check IBM support site for an applicable service bulletin or firmware update that applies to

this error.

Update the UEFI image.

Replace the system board.

Appendix B. UEFI (POST) error codes

495

Summary of Contents for x3250 m6

























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for x3250 m6

Reviews:

Related manuals for x3250 m6

Brands by name

Popular brands

Lenovo x3250 m6, Installation And Service Manual

Search results

Summary of Contents for x3250 m6

Reviews:

Related manuals for x3250 m6

Brands by name

Popular brands