Lenovo x3250 m6 Installation And Service Manual Download Page 314

Page: 314 / 696

Warning

Serviceable

Yes

Automatically notify support

Alert Category

Warning - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0520

User Response

1. Complete the administrative tasks that require the TPM physical presence switch to be in

the ON position.

2. Restore the physical presence switch to the OFF position.

Reboot the system.

4. (Trained technician only) If the error continues, replace the planar.

•

80070128-2e01ffff : Sensor [SensorElementName] has transitioned from normal to non-critical

state. (ME Recovery)

This message is for the use case when an implementation has detected a Sensor transitioned to
non-critical from normal.

May also be shown as 800701282e01ffff or 0x800701282e01ffff

Severity

Warning

Serviceable

Yes

Automatically notify support

Alert Category

Warning - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0520

User Response

1. Restart IMM. If the error doesn't disappear, please proceed step 2.

2. Update to the latest level of iMM/uEFI code, please proceed step 3.

Replace node.

300

Lenovo System x3250 M6 Installation and Service Guide

Summary of Contents for x3250 m6

























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for x3250 m6

Reviews:

Related manuals for x3250 m6

Brands by name

Popular brands

Lenovo x3250 m6, Installation And Service Manual

Search results

Summary of Contents for x3250 m6

Reviews:

Related manuals for x3250 m6

Brands by name

Popular brands