manualshive.com logo in svg

Lenovo x3250 m6, Installation And Service Manual

The Lenovo x3250 m6 is a versatile and reliable server with exceptional performance. To assist users in setting up and maintaining this powerful device, an Installation and Service Manual is available for free download. Find it on our website manualshive.com, ensuring a smooth installation and hassle-free service experience.

Share
Download
background image

2. Reseat the affected adapters and riser card.

3. Update the server firmware (UEFI and IMM) and adapter firmware. Important: Some cluster

solutions require specific code levels or coordinated code updates. If the device is part of a
cluster solution, verify that the latest level of code is supported for the cluster solution before
you update the code.

4. Replace the affected adapters.

5.

Replace the riser card.

6. (Trained service technicians only) Replace the system board.

•

806f0023-2101ffff : Watchdog Timer expired for [WatchdogElementName]. (IPMI Watchdog)

This message is for the use case when an implementation has detected a Watchdog Timer Expired.

May also be shown as 806f00232101ffff or 0x806f00232101ffff

Severity

Info

Serviceable

No

Automatically notify support

No

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0368

User Response

No action; information only.

•

806f0107-0301ffff : An Over-Temperature Condition has been detected on [ProcessorElementName].

(CPU 1)

This message is for the use case when an implementation has detected an Over-Temperature Condition
Detected for Processor.

May also be shown as 806f01070301ffff or 0x806f01070301ffff

Severity

Error

Serviceable

Yes

Automatically notify support

No

330

Lenovo System x3250 M6 Installation and Service Guide

Summary of Contents for x3250 m6

























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for x3250 m6

Acer Altos R700 Series Product Manual preview
Altos R700 Series
Brand: Acer Pages: 80
Acer Altos G700 series Rack Installation Instructions preview
Altos G700 series
Brand: Acer Pages: 14
Acer Extensa 500 System Manual preview
Extensa 500
Brand: Acer Pages: 103
Acer Altos R720 Series Installation & Configuration Manual preview
Altos R720 Series
Brand: Acer Pages: 104
F5 ARX-2500 Installation Manual preview
ARX-2500
Brand: F5 Pages: 2
F5 WANJet 400 Appliance Upgrade Instructions preview
WANJet 400 Appliance
Brand: F5 Pages: 11
Lantronix SLC 8000 Demo Manual preview
SLC 8000
Brand: Lantronix Pages: 10
Lantronix xport pro Integration Manual preview
xport pro
Brand: Lantronix Pages: 17
Lantronix PremierWave XC User Manual preview
PremierWave XC
Brand: Lantronix Pages: 109
Lantronix XPort Integration Manual preview
XPort
Brand: Lantronix Pages: 24
Lantronix WiPort Integration Manual preview
WiPort
Brand: Lantronix Pages: 29
Lantronix XPress DR+ Quick Connect preview
XPress DR+
Brand: Lantronix Pages: 2
TYAN TN76-BP016 Service Manual preview
TN76-BP016
Brand: TYAN Pages: 109
SEH SEH InterCon PS54a-G Hardware Installation Manual preview
SEH InterCon PS54a-G
Brand: SEH Pages: 24
IBM Eserver 345 Series Option Installation Manual preview
Eserver 345 Series
Brand: IBM Pages: 70
IBM @server x Series Quick Setup Manual preview
@server x Series
Brand: IBM Pages: 8
IEI Technology AVL-3000 User Manual preview
AVL-3000
Brand: IEI Technology Pages: 130
Digital Watchdog Blackjack C2P Quick Start Manual preview
Blackjack C2P
Brand: Digital Watchdog Pages: 7

Brands by name

Popular brands

Load more brands