Lenovo x3250 m6, Installation And Service Manual

Page: 125 / 696

Step 4. Disconnect cables from the adapter.
Step 5. Carefully grasp the adapter by its top edge and remove the adapter from the PCI riser-card
assembly.
Figure 42. Adapter removal
Step 6. Complete the parts replacement. See “Completing the parts replacement” on page 172.
Installing an adapter
The following tips describe the types of adapters that the server supports and other information that you
must consider when you install an adapter:
• To confirm that the server supports the adapter that you are installing, go to:
http://www.lenovo.com/ serverproven/
• Locate the documentation that comes with the adapter and follow those instructions in addition to
the instructions in this topic.
• To ensure that any of your adapters function properly on UEFI-based servers, make sure that the adapter
firmware and supporting device drivers are updated to the latest version.
• The adapter slots are on the PCI riser-card assembly. You must first remove the PCI riser-card assembly
to access the adapter slots 1 and 2.
– 1 Dedicated to ServeRAID M1210 SAS/SATA Controller
– 2 Support one PCI Express Gen3 x8 half-length, full-height adapter
Figure 43. PCI riser-card assembly
Notes:
• If your adapter was previously configured, backup or record its configuration information, if possible,
before replacing the adapter. See the documentation for your adapter for information and instructions.
Chapter 7
.
Removing and installing server components
111