Lenovo 6241 Installation And Service Manual Download Page 711

Page: 711 / 1990

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0036

User Response

Complete the following steps:

1. Check the IMM event log for any fan or cooling related issues.

2. Make sure that the airflow at the front and rear of the server is not obstructed and that fillers are

in place and correctly installed.

3. Make sure that the room temperature is within operating specifications.

4. Make sure that the microprocessor 4 heat sink is securely installed.

5. (Trained service technician only) Make sure that the microprocessor 4 heat sink is installed

correctly and the thermal material is correctly applied.

6. (Trained service technician only) Replace microprocessor 4.

•

806f0108-0a01ffff : [PowerSupplyElementName] has Failed.

IMM has detected a Fault on Power Supply 1.

May also be shown as 806f01080a01ffff or 0x806f01080a01ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Power

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0086

Appendix C. Integrated management module II (IMM2) error messages

697

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands

Lenovo 6241, Installation And Service Manual

Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands