Lenovo 6241 Installation And Service Manual Download Page 569

Page: 569 / 1990

User Response

Information only; no action is required.

•

80010002-2801ffff : Numeric sensor SysBrd VBAT going low (lower non-critical) has asserted.

The CMOS battery voltage has dropped below its specified threshold.

May also be shown as 800100022801ffff or 0x800100022801ffff

Severity

Warning

Serviceable

Yes

Automatically notify support

Alert Category

Warning - Voltage

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0476

User Response

Replace the CMOS battery.

Related links

– Removing the system battery

•

80010202-0701ffff : Numeric sensor [NumericSensorElementName] going low (lower critical) has

asserted.

A Voltage has dropped below its specified threshold (sensor SysBrd 12V, SysBrd 3.3V, or SysBrd 5V).

May also be shown as 800102020701ffff or 0x800102020701ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Voltage

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0480

User Response

1. (Trained service technician only) If the specified sensor is SysBrd 3.3V or SysBrd 5V, replace the

system board.

2. If the specified sensor is SysBrd 12V, check the IMM event log for power-supply-related issues,

and resolve those issues. If the problem remains, (trained service technician only) replace the
system board.

555

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands

Lenovo 6241, Installation And Service Manual

Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands