Lenovo 6241 Installation And Service Manual Download

Page: 1127 / 1990

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0176

User Response

– Check IMM log for Predictive Fault (PFA) or other hard drive messages to help identify failing drive

(s).

–  Replace the hard disk drives that are indicated by a lit status LED.
–  Recreate the array.
–  Restore data from backup.

•

806f060d-0406ffff : Array [ComputerSystemElementName] has failed.

Drive 6 is part of an RAID array that is in the failed condition. To identify drives in the failed array all
member drives will report this message.

May also be shown as 806f060d0406ffff or 0x806f060d0406ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0176

User Response

– Check IMM log for Predictive Fault (PFA) or other hard drive messages to help identify failing drive

(s).

–  Replace the hard disk drives that are indicated by a lit status LED.
–  Recreate the array.
–  Restore data from backup.

Appendix C. Integrated management module II (IMM2) error messages

1113

«
...
1125
1126
1127
1128
1129
...
»

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands

Lenovo 6241, Installation And Service Manual

Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands