Lenovo 6241 Installation And Service Manual Download Page 1943

Page: 1943 / 1990

•

I.1800C A cache type mismatch has been detected for one or more processor packages.

Processors have one or more cache levels with mismatched type

Explanation:

A cache type mismatch has been detected for one or more processor packages. Processors

have one or more cache levels with mismatched type

Severity

Error

User Response

Complete the following steps:

1. Verify that matching Processors are installed in the correct Processor sockets according to the

service information for this product.

2. Check IBM support site for an applicable service bulletin or firmware update that applies to this

Processor error.

3. Replace the compute book.

•

I.1800D A cache associativity mismatch has been detected for one or more processor packages.

Processors have one or more cache levels with mismatched associativity

Explanation:

A cache associativity mismatch has been detected for one or more processor packages.

Processors have one or more cache levels with mismatched associativity

Severity

Error

User Response

Complete the following steps:

1. Verify that matching Processors are installed in the correct Processor sockets according to the

service information for this product.

2. Check IBM support site for an applicable service bulletin or firmware update that applies to this

Processor error.

3. Replace the compute book.

•

I.1800E A processor model mismatch has been detected for one or more processor packages.

Processors have mismatched Model Number

Explanation:

A processor model mismatch has been detected for one or more processor packages.

Processors have mismatched Model Number

Severity

Error

User Response

Complete the following steps:

1. Verify that matching Processors are installed in the correct Processor sockets according to the

service information for this product.

2. Check IBM support site for an applicable service bulletin or firmware update that applies to this

Processor error.

3. Replace the compute book.

•

I.1800F A processor family mismatch has been detected for one or more processor packages.

Processors have mismatched Family

Explanation:

A processor family mismatch has been detected for one or more processor packages.

Processors have mismatched Family

Severity

Error

Appendix D. UEFI/POST error codes

1929

«
...
1941
1942
1943
1944
1945
...
»

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands

Lenovo 6241, Installation And Service Manual

Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands