Lenovo 6241 Installation And Service Manual Download

Page: 1298 / 1990

CIM Information

Prefix:

PLAT

ID:

0146

User Response

Complete the following steps until problem is solved:

1. Check the IMM event log for any fan or cooling related issues.

2. Make sure that the airflow at the front and rear of the server is not obstructed and that fillers are

in place and correctly installed.

3. Make sure that the room temperature is within operating specifications.

4. Check IBM Support site for Service Bulletins/RETAIN tips related to an Over Temperature

Condition.

5. If eXFlash DIMM, make sure the eXFlash DIMM FW is updated to the latest level.

6. If the DIMM problem persists and there are no other DIMMs with the same indication, replace the

DIMM.

7. If the eXFlash DIMM problem persists and there are no other eXFlash DIMMs with the same

indication, confirm that the eXFlash DIMM is under warranty before replacement.

•

806f0a0c-2b810016 : An Over-Temperature Condition has been detected on the

[PhysicalMemoryElementName] on Subsystem [MemoryElementName].

IMM determined DIMM 22 in Compute Book 1 has an Over Temperature Condition.

May also be shown as 806f0a0c2b810016 or 0x806f0a0c2b810016

Severity

Error

Serviceable

yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0146

User Response

Complete the following steps until problem is solved:

1. Check the IMM event log for any fan or cooling related issues.

1284

System x3850 X6 and x3950 X6 Installation and Service Guide

«
...
1296
1297
1298
1299
1300
...
»

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands

Lenovo 6241, Installation And Service Manual

Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands