Lenovo 6241 Installation And Service Manual Download Page 303

Page: 303 / 1990

Installation tool

Screws

Microprocessor

f. Twist the handle on the microprocessor tool counterclockwise to the open position (as shown in the

illustration) to insert the microprocessor into the socket. The microprocessor rests flush on the
socket only if it is properly installed.

Notes:

• Do not press the microprocessor into the socket.

• Do not touch the thermal grease on the bottom of the heat sink or on top of the microprocessor.

Touching the thermal grease will contaminate it.

• Make sure that the microprocessor is oriented and aligned correctly in the socket before you close

the microprocessor bracket frame.

g. Lift the microprocessor installation tool from the socket.

h. Remove the microprocessor dust cover.

Chapter 6

Removing and replacing components

289

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands

Lenovo 6241, Installation And Service Manual

Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands