Lenovo 6241 Installation And Service Manual Download Page 493

Page: 493 / 1990

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0007

User Response

Information only; no action is required.

•

40000008-00000000 : Hostname set to [arg1] by user [arg2].

The specified user has changed the Integrated Management Module host name.

May also be shown as 4000000800000000 or 0x4000000800000000

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - IMM Network event

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0008

User Response

Information only; no action is required.

•

40000009-00000000 : IP address of network interface modified from [arg1] to [arg2] by user [arg3].

The specified user has changed the IP address of the Integrated Management Module external network
interface to the specified value.

May also be shown as 4000000900000000 or 0x4000000900000000

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - IMM Network event

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0009

User Response

Information only; no action is required.

•

4000000a-00000000 : IP subnet mask of network interface modified from [arg1] to [arg2] by user

[arg3].

Appendix C. Integrated management module II (IMM2) error messages

479

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands

Lenovo 6241, Installation And Service Manual

Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands