Lenovo 6241 Installation And Service Manual Download

Page: 1228 / 1990

7. If the eXFlash DIMM problem persists and there are no other eXFlash DIMMs with the same

indication, confirm that the eXFlash DIMM is under warranty before replacement.

•

806f090c-2b820010 : [PhysicalMemoryElementName] on Subsystem [MemoryElementName]

Throttled.

IMM determined DIMM 16 in Compute Book 2 has been throttled due to high temperature.

May also be shown as 806f090c2b820010 or 0x806f090c2b820010

Severity

Warning

Serviceable

yes

Automatically notify support

Alert Category

System - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0142

User Response

Complete the following steps until problem is solved:

1. Check the IMM event log for any fan or cooling related issues.

2. Make sure that the airflow at the front and rear of the server is not obstructed and that fillers are

in place and correctly installed.

3. Make sure that the room temperature is within operating specifications.

4. Check IBM Support site for Service Bulletins/RETAIN tips related to an throttled DIMM Condition.

5. If eXFlash DIMM, make sure the eXFlash DIMM FW is updated to the latest level.

6. If the DIMM problem persists and there are no other DIMMs with the same indication, replace the

DIMM.

7. If the eXFlash DIMM problem persists and there are no other eXFlash DIMMs with the same

indication, confirm that the eXFlash DIMM is under warranty before replacement.

Related links

1214

System x3850 X6 and x3950 X6 Installation and Service Guide

«
...
1226
1227
1228
1229
1230
...
»

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands

Lenovo 6241, Installation And Service Manual

Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands