Lenovo 6241 Installation And Service Manual Download

Page: 654 / 1990

– Finding the UEFI (POST) error code

•

80070221-0b0affff : Sensor [SensorElementName] has transitioned to critical from a less severe

state.

IMM has detected an Over Temperature Condition for the ML2 adapter.

May also be shown as 800702210b0affff or 0x800702210b0affff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0522

User Response

Complete the following steps until problem is solved:

1. Check the IMM event log for any fan or cooling related issues.

2. Make sure that the airflow at the front and rear of the server is not obstructed and that fillers are

in place and correctly installed.

3. Make sure that the room temperature is within operating specifications.

4. Check IBM Support site for Service Bulletins/RETAIN tips related to an ML2 Fault Condition.

Related links

– Server features and specifications

•

80070221-1f01ffff : Sensor [SensorElementName] has transitioned to critical from a less severe

state.

IMM has reported microprocessor 1 has an External QPI Link Error.

May also be shown as 800702211f01ffff or 0x800702211f01ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0522

User Response

640

System x3850 X6 and x3950 X6 Installation and Service Guide

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands

Lenovo 6241, Installation And Service Manual

Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands