Lenovo 6241 Installation And Service Manual Download

Page: 766 / 1990

Yes

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0164

User Response

1. Check IBM Support site for Service Bulletins/RETAIN tips related to your particular drive.

2. Check IBM Support site for firmware updates related to your particular drive.

3. Check for any other RAID related errors.

4. Replace the drive.

•

806f010d-0403ffff : The [NumericSensorElementName] has been disabled due to a detected fault.

The drive 3 has been disabled (defunct) due to a fault detected by the controller.

May also be shown as 806f010d0403ffff or 0x806f010d0403ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0164

User Response

1. Check IBM Support site for Service Bulletins/RETAIN tips related to your particular drive.

2. Check IBM Support site for firmware updates related to your particular drive.

3. Check for any other RAID related errors.

4. Replace the drive.

•

806f010d-0404ffff : The [NumericSensorElementName] has been disabled due to a detected fault.

The drive 4 has been disabled (defunct) due to a fault detected by the controller.

May also be shown as 806f010d0404ffff or 0x806f010d0404ffff

Severity

Error

752

System x3850 X6 and x3950 X6 Installation and Service Guide

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands

Lenovo 6241, Installation And Service Manual

Search results

Summary of Contents for 6241

Reviews:

Related manuals for 6241

Brands by name

Popular brands